This is a tech article on how to properly calulate the correct pedal ratio for the proper mechanical leverage, pedal feel and stroke to release the clutch.

This chart is to help determine what series hydraulic bearing you need. Before you begin your measurement please make sure to have your entire clutch assembly installed on the back of the motor and torqued down to the factory specifications, this includes Flywheel, Disc,Pressure Plate,Block Plate (if used) and Bellhousing.

This chart is to help determine what series hydraulic bearing you need. Before you begin your measurement please make sure to have your entire clutch assembly installed on the back of the motor and torqued down to the factory specifications, this includes Flywheel, Disc,Pressure Plate,Block Plate (if used) and Bellhousing.

This chart is to help determine what series hydraulic bearing you need. Before you begin your measurement please make sure to have your entire clutch assembly installed on the back of the motor and torqued down to the factory specifications, this includes Flywheel, Disc,Pressure Plate,Block Plate (if used) and Bellhousing. 

Street legal performance cars today are more powerful than ever before. It would seem that while a decade ago 500 hp made you the big dog in your hometown, today it’s just the starting point.

Many of those that are making these insane power levels are also still rowing their own gears. If you’re rowing those gears, and you’re not driving what would be considered a full-on race car, then you’re probably running something heavy duty in the clutch department.

 

We regularly receive phone calls on the tech line regarding Mustangs with cable linkage and release issues with these cars. We found this article online that we think will help our customers properly reset their linkage for maximum release.

This tech article is for bleeding your 1300 Series or 1400 Series McLeod Racing Hydraulic Bearing only! If your using a OEM GM/Ford/Mopar bearing refer to the shop service manual of the specific manufacturer you are using.